Sager NP9873-S (Clevo P870DM3) - Keyboard disassembly

Modified on Fri, 19 Feb 2021 at 06:08 PM

1. Turn off the computer, and turn it over.

2. Remove the screw (Figure a).

3. Open it up with the LCD on a flat surface before pressing at point, to release the keyboard module (use an eject

stick with a diameter no bigger than 2.5mm) to do this while releasing the keyboard in the direction of the

arrow as shown (Figure b).

Carefully lift the keyboard up, being careful not to bend the keyboard ribbon cables.

5. Disconnect the keyboard ribbon cables - from the locking collar socket by using a small flat-head screwdriver

to pry the locking collar pins away from the base (Figure c).

the big cable by slightly push forward to release the lock, as for the small cable is slightly flip upward to release the lock.